Common Plumbing Problems
A lot of homeowners are searching Common Plumbing Problems online so we thought we would put together a guide to talk about each of these problems in greater detail. Many individuals have found plungers, as well as other general repair tools, to be house hold necessities. On a regular basis, with some hard work and the know how, a homemade handy man can handle many minor repairs when it comes to their plumbing. Be it plunging the toilet, replacing a worn washer, or changing a drain cover, the home made handy man can usually handle it. However, there are other problems that he can’t necessarily handle on his own. The repairs involved with slow drains, leaking toilets, and others require the attention of a professional. Trying to fix them yourself could lead to bigger issues down the road.
Jump To Section:
Common Plumbing Problems
That being said however, thoroughly inspecting your plumbing doesn’t prevent the occasional leak or clog, especially in homes that are higher in age. Mesa, AZ for example, holds a high water table that directly results in problems with septic systems, this can affect your drains and toilets. Though, there are common solutions for such common issues. This guide will also let you know when it is Time to Call a Professional. Here are the most common plumbing problems experienced in Mesa, AZ.
Sink & Faucet Drips
The dripping faucet is more than just a distraction that make it hard to fall asleep at night, it is one of the most common causes that can drive your water bill to great heights. A single dripping faucet, one drop at a time, can drain hundreds of gallons per year. This is more than just an annoying problem in the other room, it is a common problem that can cause more money to be spent than necessary. By this, it is meant to say, this common problem costs money in bills when the fix is affordable.
The reason why this annoying little drip of money going down the drain occurs is simple. In order to move through the pipes, it is under pressure. To hold the pressurized water back, there are silicone-based or rubber, water-tight seals placed in the mechanics to prevent the water from pushing its way through. With time, these washers can grow stiff and become torn, or dislodged. This allows that annoying trickle, and though the do-it-yourself method is applicable, it may prove to be a greater task to perform without specialized tools. If left unchecked, these leaks can cause the valve seat to become corroded or worn, this is a repair that is recommended to be left for a professional plumber.
Other than washers, there are some sinks who use ceramic taps to form a seal instead. The ceramic taps, also known as disc/canister taps, form a seal using durable ceramic plates. Requiring much less maintenance, the maintenance that is required can be quite complex and much more complicated compared to simple replacing a washer. The sinks and tubs that are operated by levers are most commonly the fixtures that use a ceramic disc/canister tap. Leaks under kitchen sinks are also a big problem in Arizona. If you are experiencing any of the following plumbing problems and live in the Phoenix Metropolitan area, visit the link below.
View Our Faucet / Sink Repair Services
Low Water Pressure
Caused by a buildup of sediment on the faucet aerators, build ups of deposits, and in rare cases a municipal water main break, low water pressure is recognized by a trickle of water from your tap when it should be a gushing of water.
The main cause for the drop of water pressure is the deposits and sediment that is formed over time with your faucets and shower heads. The water that flows through your piping system carries dissolved minerals that will find themselves building deposits on metal surfaces. Now days, many systems have a filtration system that causes the deposits to be gather in a filter that gets changed. However, for the faucets and shower heads that do not have these systems, the collection of these minerals is made apparent on the aerators by clogging the screen which slows the water flow. With kitchen sinks, it is as simple as removing the unscrewable aerator and soaking it in vinegar. With shower heads and common bathroom sinks, however, you do not have that ability to unscrew the tip of the faucet. In this case, you can easily affix a plastic bag to the head of the shower, or faucet, to clean it.
In the instance of experiencing the low water flow following the general maintenance and cleaning of your faucets and shower heads, your issue may be more dire than thought. This could be cause to a leak or breach in the pipes which lead to your home. This is an emergency predicament because of the infrastructure and foundation damages it could lead to. A means to call a licensed plumber, a sudden and vast drop in water pressure with no known cause can be a danger that must be addressed.
View Our Plumbing Repair Services
A tell tale sign of the due replacement of the inner workings of a toilet is a constant behavior correction of jiggling the handle after flushing. A common reason why the toilet won’t stop running long after the flush is the flapper valve, which regulates the water to pass from tank to bowl, no longer properly fits. Also, the float may be imbalanced, or a fill tube has come loose. Most of the time, toilet repair kits work and require minor effort.
On some occasions, there may be different reasons that can be found as more complex. In the event you have replaced the inner workings of your toilet’s tank, and you are still experiencing a running toilet, you may be face with sediment that is affecting the proper filling and flushing. If you have a silent leak, a higher water bill will signal this. In order to investigate a silent leak, add a few drops of food coloring to the upper tank. After allowing time to elapse for 15 minutes or more, check to see if the water in the toilet bowl has become tinted or colored. If you identify this reaction, your flapper valve is not working properly.
View Our Toilet Repair Services
Plumbing & Pipe Leaks
Either you found a puddle under a pipe, or unpleasant surprise under your sink, plumbing leaks can be an expensive issue that must be dealt with. With the average location of leaks being on the joints, many fitting compounds and joint fillers can be found occupying a vast amount of space on shelves in the hardware store. Though they can be effective on suppressing the leak, these are temporary fixes. That mean you may have to invest in the replacement of a length or pipe or fitting.
The process of replacing a U-joint isn’t exactly a complicated fix, however, it is a messy one. It is best to save the repair, and clean up, for a professional. In the meantime, you can easily keep the leak at bay with a rubber sheet and compression clamp, or leak tape. These temporary solutions are ideal until the permanent solution can be fulfilled.
Clogged and/or Slow Drains
If you find yourself with water sitting in your sink, or slowly draining, chances are you that you have a complete or partial clogged drain. Plungers can be a quick fix, but they won’t remove the clog. Drain cleaners and clog removals sometimes solve the issue, but can be harmful to some materials involved with your piping system. If clogs are a common happening, it is time to call a professional.
Before making the choice to call, take a flashlight and examine the drain. You may find a clump of hair or fallen bottle cap that is causing the blockage. This is resolved with tweezers or pliers to remove the issue, to prevent this from happening, invest in drain screens to block the debris from forming.
View Our Drain Cleaning Services
Plumbing Repair Tips, DIY
Before you approach your plumbing repairs, shut off the water main.
It can be messy, so make sure you are dressed to get wet.
When replacing fittings, washers, and pipes, make sure to take them with you to the hardware store. This way you know you are buying the right item, in some cases you can have pipes and fittings cut for you by doing this. It is important to remember the old carpentry adage, measure twice and cut once. Also be sure to keep the number or a professional plumber handy. It is better to have it and not need it, than need it and not have it.
View Our Plumbing Repair Services
Maintenance for Plumbing
As with any other functions of your home, the best way to avoid costly repairs and maintenance is a regularly kept schedule for maintenance. There are several issues you can encounter when it is too late involving your pipes, with a regular schedule you can catch the problems before they become too severe. Leaks in drains, or below the water heater, can go unnoticed for periods of time until they present to be more than just inconvenience. Minor leaks can lead to structural damage, mold growth in plaster and sheet rock. Even wood flooring/ paneling and porous tile will discolor or warp when water is absorbed.
View Our Water Heater Services
Routine Plumbing Inspections
Though we use our sinks and tubs on a daily basis, without a routine inspection, we may miss minor issues before it is too late. It is advisable to insure some time to thoroughly inspect your exposed pipes under your sink, behind your toilet, and if accessible, attached to your tubs and shower faucets. Identify moisture, or signs of moisture. When checking during humid conditions, condensation on cold metal pipes is common. Always take note of this dampness and re-inspect when conditions are cooler. Other than moisture, be aware of any signs of corrosion on your copper and brass fittings. This corrosion forms quicker on wet metal, this could reveal a slow leak. A lot of the routine maintenance responsibilities are easy jobs that can be considered ‘do-it-yourself’.
While inspecting your faucets, there are several things to take note of. Please understand, the different faucet styles hold a level of variation and purposes but that is normal. Regardless of faucet type, all faucets should hold a steady flow. Be aware of how quickly the water drains after you test the faucets, a slow drain could be linked to a clog lying in wait. While testing the water pressure, be sure to flush your toilets in order to check the base of them. Any leaks or running at the base could be a sign of a wax seal that is damaged or faulty.
Deeper Plumbing Inspections
A more thorough inspection, led by a certified plumber, can include remote video inspections, testing for lead, inspection of filter systems, and inspections of garbage disposal, plumbing system, and water heater. This can provide you with a more detailed look into the pipes and drains in your home.
Since there can be a buildup of sediment that slows the flow of water as a result, after an inspection you should remove and clean the aerators on the shower heads and faucets. However, if you chose to use a professional plumber to inspect and perform maintenance, they normally take care of this step as well as a few others for you.
- Detection of hairline leaks through pressure testing
- Assessment and adjustment of water pressure
- Maximizing rate of flow through drain treatment
- Cleaning of garbage disposals
- Water heater cleaning
Time to Call a Professional
The following tasks are too complicated and/or dangerous to approach on your own, and is suggested that you hire a certified Mesa plumber:
- Problems with the Water Heater
- Leaking Septic Tank
- Breaks in sewer lines
- Tub, Sink, or new pipe installation
- Construction that requires permits
Plumbing Repair In Mesa Arizona
5 Star Plumber Reviews In Mesa: “The gentleman that did our repairs, Todd, was a very informative plumber, who seem to be very knowledgeable, of his area of expertise. gave us some very helpful information which we used to locate the type of sink and faucet we wanted to place in our kitchen. When it came time to replace the old bad sink he showed how well he knew his job. All the while explaining what was being done and would be done next. We also learned how very poorly the original sink and garbage disposal had been put in in the first place. I would certainly recommend this company and in particular, Todd, to anyone if they are in need of a plumber.” Sandi R.
If you live or do business in the Mesa, Arizona area and are looking for plumbing repair experts, give us a call today at (480) 663-2255.